Leading Crusher Manufacturer in China.
Our stone crusher included jaw crusher, cone crusher,impact crusher, sand masker...

Solve the jaw crusher wear

The jaw crusher is easy to operate, and simple structure, easy to install large, the crushing crusher. More detailed mechanical classification situation, jaw crusher is a cyclical bearing equipment, and its dependence on the drive is mainly reflected in the final granularities of material crushing materials.

In the structure of jaw crusher, the movement amount of plate wear often happens, especially in the lower 1/3 worn more prominent. Movement jaw crusher wear can be caused by not operate normally lose crushing capacity. Jaw crusher in the work process, there will be wear, this wear can be reduced and the inevitable wear makes mechanical life is shortened, so minimize. crushing machinery in the process of processing the ore itself wear.

Problems: the jaw and machine surface contact is not smooth; eccentric shaft speed too fast, too late to exclude material already broken, resulting in crushing chamber blocked jaw wear; material change in the nature, but did not make timely adjustments crusher ; activities jaw and fixed jaw angle between too much more than the normal range; jaw strength and wear resistance, resistance performance is not good.

Solve jaw crusher jaw wear: install jaw must be fixed tight, installed, and contact with a smooth surface of the machine. Pad in the jaw, and between the surface of the machine, the material of a layer of plastic is better; each batch of material into the crusher to be carried out sampling, once the nature of the materials have a greater change, it is necessary to timely change the crusher parameters to match incoming materials; the jaw must use high hardness, wear, fight against a strong material; mining crushing production line process cement companies can mine coarse crushing and cement crushing the same type of wear jaw interchangeable; jaw wear can be used the surfacing method for repair. Note: The addition is in the course of their work, before they start feeding the normal operation of the crusher; broken materials should be uniform to join the crushing chamber should avoid the side feeding or filled with feeding, to prevent unilateral overload or withstand overload; during normal case, the bearing temperature rise of no more than 35 ℃, the maximum temperature does not exceed 70 ° C, in excess of 70 ° C should be immediately shut down and identify the reasons to be eliminated; prior to shutdown, you should first stop feeding, to be broken cavity to be crushed be completely discharged before they shut down the motor; broken when, due to the crushing cavity material obstruction caused by parking, you should immediately turn off the motor must be material cleared only after restart; wear of tooth plate at one end, turn around and use.

Yifan machinery has been established 20 years, is a research and development, design, manufacturing, sales as one of the large and medium-sized Heavy Machinery Manufacturing Company. Jaw Crusher in the sand and gravel industry to shine, to create the miracle in the field of industrial.Since its creation, the use of the scientific method of the modern enterprise management, excellent product quality and perfect after-sales service, establish a good image in the market.